Cameo
BAR 10 RGB IR WH
252 x 10 mm LED RGB Colour Bar white with IR Remote Control
- 252 luminous, long-lasting 10 mm RGB LEDs
- RGB for warmer, richer colours
- Operating in one block or separately in 3 equal blocks
- Supplied with IR remote control
- Operation via DMX, in Master/Slave mode or as a single projector
- Built-in microphone for sound-control mode
- Simple to operate using the four buttons and LED display
- Rugged metal housing with universal mounting brackets
- Power input and output jacks...
- 252 luminous, long-lasting 10 mm RGB LEDs
- RGB for warmer, richer colours
- Operating in one block or separately in 3 equal blocks
- Supplied with IR remote control
- Operation via DMX, in Master/Slave mode or as a single projector
- Built-in microphone for sound-control mode
- Simple to operate using the four buttons and LED display
- Rugged metal housing with universal mounting brackets
- Power input and output jacks for serial connection
RRP 228,00 AUD / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
Infrared remote control
The device is fitted with an infrared sensor and can be controlled wirelessly using the IR remote control unit included.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Description
The Cameo CLBARL10RGBIR is a super slim washer with RGB colour mixing, a 30° beam angle and comfortable IR remote control. With a total of 252 long-lasting and energy-efficient 10 mm LEDs the ultra bright light bar with a robust metal housing provides effective, rich colour wallpapers in bars, discos and on the stage.
The CLBARL10RGBIR can be operated via 5 DMX modes, as master, slave and standalone or in one block or separately in 3 equal blocks. 12 programs and the built-in microphone for music control ensure functionality, the manual setting is very easily done on a bright LED display using 4 buttons.
With 3-pin XLR-connectors for input and loop-through of the DMX-signal, as well as IEC-sockets for the power supply and output the Cameo CLBARL10RGBIR is equipped for serial connection. Universal mounting brackets offer extensive possibilities for mounting and alignment. The effect rich LED Washer is also available in white (CLBARL10RGBIRWH), IR remote control is included.