Cameo
MULTI PAR COB 1
Compact 4 x 30 W RGB COB LED Lighting System incl. Transport Case
- 4 x 30W ultra-bright RGB LEDs
- COB Technology for smooth colour mixing
- Professional 28-mm TV adapter for mounting
- New designed optional footswitch for easy on stage controlling
- IR-Remote included
- Operated via DMX, in master/slave mode, standalone mode or via IR-Remote
- Integrated microphone for sound control
- Simple to operate using the four buttons and LC-Display
- Heavy duty aluminium housing
- Practical...
- 4 x 30W ultra-bright RGB LEDs
- COB Technology for smooth colour mixing
- Professional 28-mm TV adapter for mounting
- New designed optional footswitch for easy on stage controlling
- IR-Remote included
- Operated via DMX, in master/slave mode, standalone mode or via IR-Remote
- Integrated microphone for sound control
- Simple to operate using the four buttons and LC-Display
- Heavy duty aluminium housing
- Practical transport case included as standard
- Dispersion Angle: 50° (25° with the supplied lens set)
- Installation points and switchable power plugs for 2 additional lights
RRP 496,55 € / piece
Specifications
COB LED technology
The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
Infrared remote control
The device is fitted with an infrared sensor and can be controlled wirelessly using the IR remote control unit included.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Three-colour RGB-LEDs
In RGB LEDs, also known as 3-in-1 LEDs, each LED has its own red, green and blue emitter. This means that each individual LED can display the additive RGP spectrum as well as white.
Description
The Cameo CLMPARCOB1 is a compact and lightweight professional lighting system using modern chip-on-board LED technology, which is extremely durable and very energy efficient. The four flat PAR spotlights with a 50° beam angle are ultra bright 30 W COB LEDs designed for intensive RGB colour mixing and both horizontal and vertical alignment.
The Cameo CLMPARCOB1 is controlled with a supplied infrared remote, an LCD display and 4 buttons, or via an optional footswitch. Eight DMX modes with numerous functions and efficient programs, master, slave and standalone operation as well as a built-in microphone for sound control provide maximum flexibility and effective lighting effects.
All inputs and outputs of the CLMPARCOB1 are encased in a rugged aluminium support with 28mm TV spigots for tripod setup. The mains connection is made via a secure locking Neutrik PowerCon plug; two switchable earthing contact power sockets are used to power other Cameo projectors that can be mounted on the same support.
The current consumption of the Cameo CLMPARCOB1 is extremely low (120 watts). Weighing only 8.8 kg, the lighting system comes with a practical carrying case.