AMP 205 AV

AMP 205 AV

HDMI Audio De-Embedder & Amplifier 2x50W @ 4 Ohm

Item no.: LDAMP205AV

Guarantee: 60 months

EAN: 4049521798825

Sliding scale: 1

Unit: Piece

Packaging unit: 6

Series:TICA

Versions:

Item highlights:

  • Professional mini amplifier with HDMI Audio de-embedder
  • HDMI In- and Out and stereo line outputs
  • 2 x 50W Class-D amplifier with low impedance outputs
  • Compact form factor and passive cooling
  • Remote source select, standby and volume control
  • External 100-240V power supply
  • Mounting plates for flexible inconspicuous installation, even above suspended ceilings
  • Auto standby to save power
  • Balanced line output and loudspeaker output on terminal blocks
  • User-friendly front panel with signal, clip and protection LEDs.
  • Optional rack tray for combining with other TICA® series products

Specifications

Product type
Installation power amplifier and HDMI Audio-Deembedder
Line inputs
0
Line outputs
2
Line output connectors
Pitch 3.81 mm terminal block (3-pin), Balanced line outputs
Loudspeaker outputs
2 with output mode selector (Stereo / High Power Mode)
Cooling
Convection
Supported color format
YUV420, YUV444, YUV422, RGB
Max. data rate
48 Gbit/s
Resulution range
Up to 4K2K 60Hz
Color bit depth
8 bits per color
Chroma Sampling
4 : 4 : 4
HDMI standards
HDCP 1,4 - 2,3, HDMI 2,1
Number of HDMI Inputs
1
HDMI Input Connector
1 female HDMI type A
Number of HDMI Outputs
1
HDMI Output Connector
1 female HDMI type A
Standby wake up threshold
7 seconds
THD + N
> 0.006%
SNR (A)
> 100 dB
Frequency range
15 Hz - 20 kHz (-0,5 dB)
Output level
+15 dBu (0dBFS / 1kHz)
Main Volume (VCA)
Pitch 3,5 mm terminal block (3-Pin), 10 kOhm (Linear Taper) External Potentiometer
Source select
Pitch 3,5 mm terminal block (3-Pin)
Power Standby
Pitch 3.5mm terminal block (2-pin), External momentary button
Type
Class D
Output modes
High Power Mode (ST/ HPM), stereo
Amplifier Outputs
2- channel (STEREO) / 1-Channel (HPM)
Connector
4 - pin terminal block (pitch 5.08mm)
THD + N
< 0.05 %
SRN ( A )
< 100 dB
RMS Power ( W )
2 x 50 W @ 4 ohm (ST), 1 x 100 W @ 2 ohm (Continuous sine wave 1 kHz 10 sec)
Minimum load impedance
2 Ohms (HPM), 4 Ohm (ST)
Frequency response
15 Hz - 20 kHz (-0,5 dB)
Protection circuits
over-current, DC protection, Short circuit, thermal overload
Type1
External SMPS
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Fuse
0
Power Supply Secondary
24 V DC
Secondary Current
3,5 A
Secondary connector
Terminal block 5.08 mm 2-pole
Primary Connector
IEC
Safety class
Class 3
Max. power consumption
155 W ( 0 dBFS, sine 1 kHz with 2 x 4 Ohm load )
Idle power consumption
6.8 W
Standby power consuption
< 1.5 W
Mains Inrush Current
2.4 A @ 230 V AC
Operating temperature ( non-condensing )
0°C - 40°C; < 85% humidity, non condensing
Material
Plastic Front panel, Steel chassis
Dimensions (W x H x D) ( height with rubber feet )
142 mm x 53 mm x 222 mm
Weight
1,1 kg
Accessories (included)
Terminal blocks for electrical connections., External SMPS, Mounting plates for surface mount applications

Description

AMP 205 AV

The LD Systems AMP 205 AV is the perfect complement to deliver sound from an AV system. Just connect your video source and it extracts the audio and delivers stereo audio to your loudspeakers. An HDMI pass though connection makes connection to your display device easy.

Powered by a highly efficient 2x50W Class-D amplifier, it features 4 Ohm outputs and a user-friendly front panel, equipped with signal, clip, and protection LEDs.

Its tiny form factor (142 x 44 x 222) and included mounting plates allow it to be installed discreetly almost anywhere; behind screens, under tables or even in air-handling spaces and above plenum ceilings. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

The AMP 205 AV uses an external 24V power supply. Terminal block connections for the analogue outputs and GPIO connections make wiring easy.

Remote control connectivity for third-party devices lets you select between HDMI input and HDMI out (ARC). You can also adjust volume on either channel, and put the power amplifier into standby mode at any time, ideal for when the amp is hidden away. Optional auto-standby saves power when no audio is running.

The perfect solution for professional installers and users looking to deliver higher performance audio for the video systems.

Accessories

Downloads

Manuals
CAD & Drawings
Images & Artwork
Catalogues & Publications
Service & Regulation Documents
Display all
Name
Type
Format
File size
LDAMP205AV User Manual User Manual.pdf2.26 MB
LD Systems REACh Declaration Adam Hall GmbHREACh Declaration.pdf493.71 KB
LD Systems RoHS Confirmation Adam Hall GmbHRoHS Confirmation.pdf197.63 KB
LDAMP205AV 2D Drawing 2D Drawing.dxf8.91 MB
LDAMP205AV 2D Drawing 2D Drawing.pdf151.62 KB
LD Systems Catalogue / Brochure Highlight Brochure InstallCatalogue / Brochure.pdf6.51 MB
LD Systems Catalogue / Brochure Adam Hall Group Product Highlights Spring/Summer 2025Catalogue / Brochure.pdf24.23 MB
LD Systems Catalogue / Brochure Highlight Brochure DJ & MusicCatalogue / Brochure.pdf4.4 MB
LD Systems Manufacturer's Declaration LD-SYSTEMSManufacturer's Declaration.pdf66.91 KB
Product ImagesImages & Artwork.zip-

Nothing there?
You can find more downloads in our download centre.

Stories

EMAS logo

We are EMAS certified!

Copyright © 2025 Adam Hall GmbH. All rights reserved. | * Excluding VAT.