DUBHE 5Q DANTE

DUBHE 5Q 4 Channel Amplifier + DANTE

N.º de artículo: RAMDUBHE5QD

Garantía: 60 meses

EAN: 4049521807046

Tamaño del lote: 1

Unidad: Unidad

Unidad de embalaje: 1

Serie:DUBHE

Modelos:

¿Tiene preguntas acerca de este artículo?

Buscar un distribuidor

Características destacadas:

Low weight high efficiency class D topology
Universal power supply with PFC
Up to 10000 W in 4 channels
8, 4 and 2 Ohm low impedance operation
100, 70, 50 and 35 V high impedance modes
RAM Audio advanced Power Control Management (PCM™)
Optional Dante™ Networking (AES67) and GPIO for third party interface
Subsonic filter
Signal link mini-dips configurable
Output level control in rear panel
Output mode configuration for high or low impedance with power limitation
Phoenix connectors for inputs and outputs
Up-side-down design to avoid fan dust accumulation
Temperature controlled, front to back cooling fan

Especificaciones

Channels

Total output power

5000 W

Rated ouput power @ 2 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 2 Ohms (single channel)

1 x 1250 W

Rated ouput power @ 2.67 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 2.67 Ohms (single channel)

1 x 1700 W

Rated ouput power @ 4 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 4 Ohms (single channel)

1 x 2500 W

Rated ouput power @ 8 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 8 Ohms (single channel)

1 x 1250 W

Rated ouput power (4 Ohms, bridged)

2 x 2500 W

Rated ouput power (8 Ohms, bridged)

2 x 2500 W

Hi - Z 100 V

1 x 2500 W, 4 x 1250 W

Hi - Z 70 V

4 x 1250 W, 1 x 1800 W

Max output voltage

150 Vpeak

Max. output current

36 Apeak

Total Harmonic Distortion (THD)

< 0.05 %

Crosstalk (20Hz - 1kHz)

> 70 dB

Voltage gain

26 dB to 44 dB

Signal/noise ratio

111 dB

Operating voltage

90 V AC - 265 V AC, 50 - 60 Hz

1/8 rated power (@230V/4 ohm)

3.7 A

Protection circuits

on/off transients, power supply overload, soft start, RF, PCM ™, mute when turning on, Open or mismatched loads, Short circuit, thermal overload, ICL™, DC

Width

483 mm

Height

89 mm

Depth

342 mm

Weight

7 kg

Descripción

DUBHE 5Q DANTE

DUBHE Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors and output level control potentiometers in the rear panel.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure how to sharing the power between between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have many configuration possibilities such as bridge mode, subsonic filter, channel power limiter and signal link, among others, in order to satisfy the needs of any particular installation. These devices also can be equipped with a GPIO connection to interface with a third party control system. Optional Dante™ Networking (AES67) and GPIO connection to interface with a third party control system are available for DUBHE amplifiers.

With all these configurations DUBHE amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Descargas

Nombre	Tipo	Formato	Tamaño de archivo
RAMDUBHE5QD Product Data Sheet	Product Data Sheet	.pdf	426.21 KB
Ram Audio Catalogue / Brochure RAM Audio	Catalogue / Brochure	.pdf	2.11 MB
Imágenes del artículo	Fotos y gráficos	.zip	-

¿No hay nada?
Encontrará más descargas en nuestro Centro de descargas.

Ir al centro de descargas

DUBHE 5Q DANTE

DUBHE 5Q 4 Channel Amplifier + DANTE

Características destacadas:

Especificaciones

General

Descripción

DUBHE 5Q DANTE

Descargas

Historias