DUBHE 10Q

DUBHE 10Q

DUBHE 10Q 4 Channel Amplifier

Référence: RAMDUBHE10Q

Garantie: 60 mois

Code EAN: 4049521807060

Tarif différencié: 1

Unité: Pièce

Unité d'emballage: 1

Série:DUBHE

Modèles :

Points forts du produit :

DUBHE Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors and output level control potentiometers in the rear panel.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure how to sharing the power between between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have many configuration possibilities such as bridge mode, subsonic filter, channel power limiter and signal link, among others, in order to satisfy the needs of any particular installation. These devices also can be equipped with a GPIO connection to interface with a third party control system. Optional Dante™ Networking (AES67) and GPIO connection to interface with a third party control system are available for DUBHE amplifiers.

With all these configurations DUBHE amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Caractéristiques

Canaux
4
Puissance de sortie totale
10000 W
Puissance de sortie sur 2 Ohms (tous les canaux utilisés)
4 x 2500 W
Puissance de sortie nominale à 2 Ohms (canal unique)
1 x 2500 W
Puissance de sortie sur 2,67 Ohms (tous les canaux utilisés)
4 x 2500 W
Puissance de sortie nominale à 2,67 Ohms (canal unique)
1 x 3300 W
Puissance de sortie sur 4 Ohms (tous les canaux utilisés)
4 x 2500 W
Puissance de sortie nominale à 4 Ohms (canal unique)
1 x 2500 W
Puissance de sortie sur 8 Ohms (tous les canaux utilisés)
4 x 1250 W
Puissance de sortie nominale à 8 Ohms (canal unique)
1 x 1300 W
Puissance de sortie (4 Ohms, mode Bridge)
2 x 5000 W
Puissance de sortie (8 Ohms, mode Bridge)
2 x 5000 W
Hi - Z 100 V
4 x 2500 W, 1 x 2500 W
Hi - Z 70 V
4 x 2500 W, 1 x 2500 W
Tension de sortie maximale
150 Vpeak
Intensité de sortie maxi
50 Apeak
Taux de distorsion (THD)
< 0,05 %
Crosstalk (20Hz - 1kHz)
> 70 dB
Amplification d'alimentation (Gain)
26 dB à 44 dB
Rapport signal/bruit
111 dB
Tension secteur
90 V AC - 265 V AC, 50 - 60 Hz
1/8 de la puissance nominale (@230V/4 ohm)
7,3 A
Circuits de protection
protection contre les transitoires à l'allumage/extinction, Surcharge du bloc secteur, ICL™, RF, PCM ™, Mute à la mise sous tension, Temporisation au démarrage, Charges ouvertes ou inadaptées, Court-circuit, Surchauffe, DC
Largeur
483 mm
Hauteur (mm)
89 mm
Profondeur
342 mm
Poids
7 kg

Téléchargements

Nom
Type
Format
Taille du fichier
Photos du produitImages & graphiques.zip-

Rien à faire ?
Vous trouverez d'autres téléchargements dans notre centre de téléchargement.

Articles

Logo EMAS

Nous sommes certifiés EMAS !

Copyright © 2025 Adam Hall GmbH. Tous droits réservés. | * Hors TVA.