ROADBUDDY 10 BPH 2

ROADBUDDY 10 BPH 2

Battery-Powered Bluetooth Speaker with Mixer, 2 Bodypack and 2 Headsets

Référence: LDRBUD10BPH2

Garantie: 24 mois

Code EAN: 4049521267413

Tarif différencié: 1

Unité: Pièce

Unité d'emballage: 1

Série:ROAD

Modèles :

Points forts du produit :

  • Battery powered speaker solution
  • Integrated radio receiver 863 - 865 MHz for license-free operation
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • 2 Wireless microphones and IR-remote control included

Caractéristiques

Product type
Battery-powered PA speaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF driver dimention (mm)
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120 W
Peak power
480 W
Frequency response
55 - 18000
SPL (1W/1m)
96 dB
Max. SPL
115 dB
Protection circuits
over-current, Short circuit, overload protection
Controls
Mic 1 Level, Echo, Mic 2 Level, low, high, AUX / MP3 switch, CD / Tape IN Level, Total volume
Indicators
Charge/battery status, Power
Supported media
SD Card, USB stick
Supported formats
MP3 file, WAV-CD, WMA file
Media player controls
Play / Pause, Next Track, Previous Track, Stop, equalizer, Repeat, Mode (Menu / Bluetooth /SD / USB)
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x RCA, 6.3 mm jack, 3.5 mm jack, 2 x XLR
Mic inputs
2, 6.3 mm jack, 2 x XLR
Transmission frequency range
863 - 865 MHz
Modulation Type
FM
Channels
16
Frequency Response Wireless Unit
50 - 17000 Hz
Controllers Wireless Unit
Value Up, Mute Level (Squelch), Value Down, ASC, Power / Volume
Indicators Wireless Unit
LED Display, RF (LED), AF (LED)
Connections Wireless Unit
nTNC for receiver antenna
RF Transmitter Power Output
10 mW
Bodypack weight
0.08 kg
Bodypack material
ABS plastic
Power supply
Switching power supply
Operating voltage
220 V - 240 V AC / 50 Hz, 100 V - 120 V / 60 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
Polypropylene
Cabinet construction
Bass Reflex
Width
415 mm
Height
525 mm
Depth
328 mm
Weight
16,5 kg
Other features
Stand mount 36 mm, IR Remote for Media Player, transport handle, Transport casters, extendable handle

Description

ROADBUDDY 10 BPH 2

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Vidéos sur cet article

Accessoires

Pièces détachées

LDRBUD10RC
Remote control for LDRBUD10
Loading...
ROAD JACK BATTERY
LDRJBATTERY
Pile pour LDRJ8, LDRJ10 & LDRBUD10
Loading...
LDRBUD10LS
Boomer 10" pour LDRBUD10
Loading...
LDRBUD10BC
Couvercle compartiment à piles LDRBUD10
Loading...
LDRBUD10HANDLE
Poignée de transport pour LDRBUD10
Loading...
LDRBUD10GR
Grille for LDRBUD10/ LDRBUD10HS
Loading...
LDWS100ATX
Antenne pour Systèmes LDWS et LDMEI X
Loading...
LDRBUD10WHEEL
Roulettes pour LDRBUD10
Loading...
LDRBUD10HFD
Tweeter 1" pour LDRBUD10
Loading...
Sweet SixTeen BP
LDWS1616BP
Émetteur Ceinture (Beltpack)
Loading...
LDRBUD10POHANDLE
Poignée télescopique pour LDRBUD10
Loading...

Téléchargements

Manuals
Data Sheets & Specifications
CAD & Drawings
Images & graphiques
Catalogues & Publications
Service & Regulation Documents
Tout afficher
Nom
Type
Format
Taille du fichier
LDRBUD10BPH2 User Manual User Manual.pdf2.41 MB
ROAD Frequency List DeviceFrequency List.pdf41.71 KB
ROAD Frequency List CountryFrequency List.pdf76.1 KB
LD Systems REACh Declaration Adam Hall GmbHREACh Declaration.pdf493.71 KB
LD Systems RoHS Confirmation Adam Hall GmbHRoHS Confirmation.pdf197.63 KB
LDRBUD10BPH2 2D Drawing 2D Drawing.pdf226.55 KB
LDRBUD10BPH2 2D Drawing 2D Drawing.dwg907.19 KB
LD Systems Catalogue / Brochure Highlight Brochure InstallCatalogue / Brochure.pdf6.51 MB
LD Systems Catalogue / Brochure Adam Hall Group Product Highlights Spring/Summer 2025Catalogue / Brochure.pdf24.23 MB
LD Systems Catalogue / Brochure Highlight Brochure DJ & MusicCatalogue / Brochure.pdf4.4 MB
LD Systems Manufacturer's Declaration LD-SYSTEMSManufacturer's Declaration.pdf66.91 KB
Photos du produitImages & graphiques.zip-

Rien à faire ?
Vous trouverez d'autres téléchargements dans notre centre de téléchargement.

Histoires

Logo EMAS

Nous sommes certifiés EMAS !

Copyright © 2025 Adam Hall GmbH. Tous droits réservés. | * Hors TVA.