ROADBUDDY 10 HHD 2

ROADBUDDY 10 HHD 2

Battery-Powered Bluetooth Speaker with Mixer and 2 Wireless Microphones

Référence: LDRBUD10HHD2

Garantie: 24 mois

Code EAN: 4049521267338

Tarif différencié: 1

Unité: Pièce

Unité d'emballage: 1

Série:ROAD

Modèles :

Points forts du produit :

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Caractéristiques

Type de produit
Enceinte sur batterie
Diamètre boomer/médium
10 "
Diamètre Boomer
254 mm
Aimant boomer
Ferrite
Marque boomer
Sur mesure
Diamètre tweeter
1 "
Diamètre Tweeter
25,4 mm
Aimant tweeter
Ferrite
Marque tweeter
Sur mesure
Amplificateur
Classe D
Puissance (efficace)
120 W
Puissance (crête)
480 W
Réponse en fréquence
55 - 19000
Niveau de pression sonore (pour 1 W à 1 m)
96 dB
Niveau de pression sonore maximal
115 dB
Circuits de protection
Surtension, surcharge, Court-circuit
Réglages
sélecteur AUX / MP3, Mic 2 Level, Graves, CD / Tape IN Level, Volume général, Mic 1 Level, Echo, High
Indicateurs
Power, Indicateur de charge / batterie
Médias reconnus
Clé USB, Bluetooth, Carte SD
Formats reconnus
Fichiers WMA, Fichiers MP3, CD avec fichiers WAV
Contrôles lecteur médias
Plage suivante, Égaliseur, Plage précédente, Play / Pause, Repeat, Mode (Menu / Bluetooth /SD / USB), Stop
Indicateurs lecteur médias
Écran LCD multifonctions rétro-éclairé
Entrées ligne
1
Connecteurs d'entrée ligne
Mini-Jack 3,5 mm, 2 x XLR, 2 x Cinch (RCA), Jack 6,35 mm
Entrées micro
2, Jack 6,35 mm, 2 x XLR
Gamme de fréquences HF
863 - 865 MHz
Type de modulation
FM
Canaux
16
Réponse en Fréquence récepteur HF
50 - 17000 Hz
Contrôles récepteur HF
Value Up, Niveau de Mute (Squelch), Value Down, Power / Volume, ASC (scan automatique)
Indicateurs récepteur HF
écran LED, indicateur audio (LED), RF (LED)
Connecteurs récepteur HF
nTNC pour antenne récepteur
Puissance d'Émission HF
10 mW
Poids du Micro/Émetteur à main
0,285 kg
Matériau du Micro/Émetteur à main
Aluminium
Alimentation électrique
Bloc secteur
Tension secteur
100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Batteries rechargeables
12 V / 5 Ah
Matériau coffret
Polypropylène
Finition coffret
Bass Reflex
Largeur
415 mm
Hauteur (mm)
525 mm
Profondeur
328 mm
Poids
17,2 kg
Autres propriétés
Poignée télescopique, Infrarouge pour lecteur de médias, Roulettes de transport, poignée de transport, Embase pour pied, diamètre 36 mm

Vidéos sur cet article

Accessoires

Pièces détachées

LDWS100ATX
Antenne pour Systèmes LDWS et LDMEI X
Loading...
LDRBUD10HANDLE
Poignée de transport pour LDRBUD10
Loading...
LDRBUD10LS
Boomer 10" pour LDRBUD10
Loading...
Sweet SixTeen MD
LDWS1616MD
Micro Main dynamique
Loading...
LDRBUD10BC
Couvercle compartiment à piles LDRBUD10
Loading...
LDRBUD10POHANDLE
Poignée télescopique pour LDRBUD10
Loading...
ROAD JACK BATTERY
LDRJBATTERY
Pile pour LDRJ8, LDRJ10 & LDRBUD10
Loading...
LDRBUD10GR
Grille for LDRBUD10/ LDRBUD10HS
Loading...
LDRBUD10WHEEL
Roulettes pour LDRBUD10
Loading...
LDRBUD10RC
Remote control for LDRBUD10
Loading...
LDRBUD10HFD
Tweeter 1" pour LDRBUD10
Loading...

Téléchargements

Manuels
Fiches techniques et spécifications
CAO et schémas
Images & graphiques
Documents de service et de réglementation
Tout afficher
Nom
Type
Format
Taille du fichier
LDRBUD10HHD2 Mode d'emploi Mode d'emploi.pdf2.41 MB
ROAD Listes de fréquences DeviceListes de fréquences.pdf41.71 KB
LD Systems Déclarations REACh Adam Hall GmbHDéclarations REACh.pdf493.71 KB
LD Systems Confirmations RoHS Adam Hall GmbHConfirmations RoHS.pdf197.63 KB
LDRBUD10HHD2 Dessins 2D Dessins 2D.pdf226.55 KB
LDRBUD10HHD2 Dessins 2D Dessins 2D.dwg907.19 KB
LD Systems Déclarations du fabricant LD-SYSTEMSDéclarations du fabricant.pdf66.91 KB
Photos du produitImages & graphiques.zip-

Rien à faire ?
Vous trouverez d'autres téléchargements dans notre centre de téléchargement.

Articles

Logo EMAS

Nous sommes certifiés EMAS !

Copyright © 2025 Adam Hall GmbH. Tous droits réservés. | * Hors TVA.