Service Hotline:
+49 6081 9419-300

Help & Service

Shopping Basket

0

LD Systems
AMP 205 AV

HDMI Audio De-Embedder & Amplifier 2x50W @ 4 Ohm

NEW
slide 1 of 4
slide 1 to 3 of 4

Price on request

Item No.:
LDAMP205AV
EAN:
4049521798825
Guarantee:
60 Months
Unit:
piece
Series:
Versions:
  • Professional mini amplifier with HDMI Audio de-embedder
  • HDMI In- and Out and stereo line outputs
  • 2 x 50W Class-D amplifier with low impedance outputs
  • Compact form factor and passive cooling
  • Remote source select, standby and volume control
  • External 100-240V power supply
  • Mounting plates for flexible inconspicuous installation, even above suspended ceilings
  • Auto standby to save power
  • Balanced line output and...
Read on
AMP 205 AV
AMP 205 AV
HDMI Audio De-Embedder & Amplifier 2x50W @ 4 Ohm

Price on request

Specifications
Specifications
Description
Accessories
Stories
Downloads/links

Specifications

General
Product type
Installation power amplifier and HDMI Audio-Deembedder
Line inputs
0
Line outputs
2
Line output connectors
Balanced line outputs, Pitch 3.81 mm terminal block (3-pin)
Loudspeaker outputs
2 with output mode selector (Stereo / High Power Mode)
Cooling
Convection
HDMI specifications
Supported color format
RGB, YUV420, YUV422, YUV444
Max. data rate
48 Gbit/s
Resulution range
Up to 4K2K 60Hz
Color bit depth
8 bits per color
Chroma Sampling
4 : 4 : 4
HDMI standards
HDCP 1,4 - 2,3, HDMI 2,1
Number of HDMI Inputs
1
HDMI Input Connector
1 female HDMI type A
Number of HDMI Outputs
1
HDMI Output Connector
1 female HDMI type A
Standby wake up threshold
7 seconds
Line output
THD + N
> 0.006%
SNR (A)
> 100 dB
Frequency range
15 Hz - 20 kHz (-0,5 dB)
Output level
+15 dBu (0dBFS / 1kHz)
3rd Party Control
Main Volume (VCA)
10 kOhm (Linear Taper) External Potentiometer, Pitch 3,5 mm terminal block (3-Pin)
Source select
Pitch 3,5 mm terminal block (3-Pin)
Power Standby
External momentary button, Pitch 3.5mm terminal block (2-pin)
Amplifier Output
Type
Class D
Output modes
High Power Mode (ST/ HPM), stereo
Amplifier Outputs
2- channel (STEREO) / 1-Channel (HPM)
Connector
4 - pin terminal block (pitch 5.08mm)
THD + N
< 0.05 %
SRN ( A )
< 100 dB
RMS Power ( W )
1 x 100 W @ 2 ohm (Continuous sine wave 1 kHz 10 sec), 2 x 50 W @ 4 ohm (ST)
Minimum load impedance
2 Ohms (HPM), 4 Ohm (ST)
Frequency response
15 Hz - 20 kHz (-0,5 dB)
Protection circuits
DC protection, over-current, Short circuit, thermal overload
Power supply
Type1
External SMPS
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Fuse
0
Power Supply Secondary
24 V DC
Secondary Current
3,5 A
Secondary connector
Terminal block 5.08 mm 2-pole
Primary Connector
IEC
Safety class
Class 3
Max. power consumption
155 W ( 0 dBFS, sine 1 kHz with 2 x 4 Ohm load )
Idle power consumption
6.8 W
Standby power consuption
< 1.5 W
Mains Inrush Current
2.4 A @ 230 V AC
Operating temperature ( non-condensing )
0°C - 40°C; < 85% humidity, non condensing
General data
Material
Plastic Front panel, Steel chassis
Dimensions (W x H x D) ( height with rubber feet )
142 mm x 53 mm x 222 mm
Weight
1,1 kg
Accessories (included)
External SMPS, Mounting plates for surface mount applications, Terminal blocks for electrical connections.

Description

The LD Systems AMP 205 AV is the perfect complement to deliver sound from an AV system. Just connect your video source and it extracts the audio and delivers stereo audio to your loudspeakers. An HDMI pass though connection makes connection to your display device easy.

Powered by a highly efficient 2x50W Class-D amplifier, it features 4 Ohm outputs and a user-friendly front panel, equipped with signal, clip, and protection LEDs.

Its tiny form factor (142 x 44 x 222) and included mounting plates allow it to be installed discreetly almost anywhere; behind screens, under tables or even in air-handling spaces and above plenum ceilings. Alternatively, it fits into 1/3 19 inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.

The AMP 205 AV uses an external 24V power supply. Terminal block connections for the analogue outputs and GPIO connections make wiring easy.

Remote control connectivity for third-party devices lets you select between HDMI input and HDMI out (ARC). You can also adjust volume on either channel, and put the power amplifier into standby mode at any time, ideal for when the amp is hidden away. Optional auto-standby saves power when no audio is running.

The perfect solution for professional installers and users looking to deliver higher performance audio for the video systems.

Accessories

slide 3 to 5 of 2

Stories

slide 1 to 2 of 2

Downloads/links

User manual

Category: Manual

Type: pdf

File size: 2 MB

Tender documents

Category: Tender Specifications

Type: zip

File size: 162 KB

Highlights DJ & musician

Category: Catalog

Type: pdf

File size: 4 MB

Highlights installations

Category: Catalog

Type: pdf

File size: 7 MB

Item images

Category: Product images

Type: zip

File size: -

Name
Category
Type
File size
User manual Manual pdf 2 MB
Tender documents Tender Specifications zip 162 KB
Highlights DJ & musician Catalog pdf 4 MB
Highlights installations Catalog pdf 7 MB
Item images Product images zip -
(0) Download files

Customers also bought

slide 6 to 8 of 20