Cameo
AURO® SPOT 400
LED Moving Head
- RDM-capable moving head with high-power single LED
- 200,000 lx @ 1 m, 4470 lm
- High-speed 3-phase motors
- Motor focus, pan and tilt with 16-bit resolution
- Automatic positioning correction
- 2 color wheels, 12 colors, split colors, warm and cold white plus open
- 2 gobo wheels, 7 rotating, 9 fixed gobos plus open
- Frost filter
- Rotating 3, 5 and 8-facet prisms
- 0 – 20 Hz strobe
- Smooth 100 – 0% dimming...
- RDM-capable moving head with high-power single LED
- 200,000 lx @ 1 m, 4470 lm
- High-speed 3-phase motors
- Motor focus, pan and tilt with 16-bit resolution
- Automatic positioning correction
- 2 color wheels, 12 colors, split colors, warm and cold white plus open
- 2 gobo wheels, 7 rotating, 9 fixed gobos plus open
- Frost filter
- Rotating 3, 5 and 8-facet prisms
- 0 – 20 Hz strobe
- Smooth 100 – 0% dimming with 4 selectable curves
- Temperature controlled low-noise fan
- 3 and 5-pin DMX and Neutrik powerCON inputs and outputs
- Battery powered 6-button display for offline configuration
RRP 6.415,48 ILS / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Description
Featuring 16-bit resolution and high speed 3-phase motors for 630° pan and 230° tilt,the Cameo AURO® SPOT 400 is a professional moving head with RDM capability and powerful, ultra bright single LED. The fixture sports 2 gobo wheels, rotating and fixed gobos, 2 color wheels and a choice of 3 rotating prisms enabling spectacular lighting and stunning effects with 12 intense colors, split colors and two temperatures of white.
The AURO® SPOT 400 provides 5-channel, 19-channel and 27-channel DMX control and auto programs , so that operation as master, slave and standalone is possible. Functions include motorized focus, frost filter, a choice of 4 smooth dimming curves, shake effects and a fast 0 - 20 Hz cycle strobe.
The heavy-duty compound enclosure integrates a battery-powered 6-button display that allows convenient offline configuration, 3-pin and 5-pin DMX inputs and outputs, Neutrik powerCON connectors and a temperature-controlled low-noise fan. The multi- voltage AURO® SPOT 400 runs on 100 - 240 V AC.