DENEB 2.5Q

VIDEO

DENEB 2.5Q

DENEB 2.5Q 4 Channel Amplifier

Cod. articolo: RAMDENEB25Q

Garanzia: 60 mesi

EAN: 4049521806865

Scala indicizzata: 1

Unità: Pz

Unità di imballaggio: 1

Serie:DENEB

Versioni:

Domande sull’articolo?

Trova un rivenditore

Articolo in evidenza:

Large IPS display, capacitive touch panel user interface
High performance 96kHz DSP processor
Optional Dante™ Networking (AES67) and AES3 Digital inputs
Two ports Ethernet and USB port for DSP control
Optional GPIO for third party interface
Low weight high efficiency class D topology
Universal power supply with PFC
Up to 10000 W in 4 channels
8, 4 and 2 Ohm low impedance operation
100, 70, 50 and 35 V high impedance modes
Advanced RAM Audio Power Control Management (PCM™)
Phoenix connectors for inputs and outputs
Up-side-down design to avoid fan dust accumulation
Removable dust filter foam
Temperature controlled, front to back cooling fan

Specifiche

Channels

4

Total output power

2500 W

Rated ouput power @ 2 Ohms (all channels driven)

4 x 312 W

Rated ouput power @ 2 Ohms (single channel)

1 x 312 W

Rated ouput power @ 2.67 Ohms (all channels driven)

4 x 430 W

Rated ouput power @ 2.67 Ohms (single channel)

1 x 430 W

Rated ouput power @ 4 Ohms (all channels driven)

4 x 625 W

Rated ouput power @ 4 Ohms (single channel)

1 x 625 W

Rated ouput power @ 8 Ohms (all channels driven)

4 x 625 W

Rated ouput power @ 8 Ohms (single channel)

1 x 1250 W

Rated ouput power (4 Ohms, bridged)

2 x 625 W

Rated ouput power (8 Ohms, bridged)

2 x 1250 W

Hi - Z 100 V

4 x 625 W, 1 x 1250 W

Hi - Z 70 V

1 x 900 W, 4 x 625 W

Max output voltage

150 Vpeak

Max. output current

18 Apeak

Total Harmonic Distortion (THD)

< 0.05 %

Crosstalk (20Hz - 1kHz)

> 70 dB

Voltage gain

26 dB to 44 dB

Signal/noise ratio

111 dB

Operating voltage

90 V AC - 265 V AC, 50 - 60 Hz

1/8 rated power (@230V/4 ohm)

2.1 A

Protection circuits

power supply overload, mute when turning on, on/off transients, RF, PCM ™, soft start, Open or mismatched loads, Short circuit, thermal overload, DC, ICL™

Width

483 mm

Height

89 mm

Depth

330 mm

Weight

7 kg

Descrizione

DENEB 2.5Q

DENEB Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure through the DSP how to sharing the power between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have been equipped with a high quality 64 bit double-precision 96kHz FIR-DSP and a large IPS display, capacitive touch panel user interface.

Optional Dante™ Networking (AES67) and AES3 Digital inputs are available for DENEB amplifiers.

These devices also can be equipped with a GPIO connection to interface with a third party control system.

With all these configurations DENEB amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Video relativi a questo articolo

Download

	Nome	Tipo	Formato	Dimensione file
	RAMDENEB25Q Quick Start Guide	Quick Start Guide	.pdf	450.32 KB
	RAMDENEB25Q Product Data Sheet	Product Data Sheet	.pdf	871.52 KB
	RAMDENEB25Q Software RAM OCS	Software	.zip	14.77 MB
	Ram Audio Catalogue / Brochure RAM Audio	Catalogue / Brochure	.pdf	2.11 MB
	Immagini dei prodotti	Immagini e grafica	.zip	-

Non c’è niente?
Trovi altri file da scaricare nel nostro Centro di download.

Vai al Centro di download

Storie