Cameo
F2 FC PO
Pole-operated Fresnel Spotlight with RGBW LED
- Full Colour Fresnel with special RGBW LED and CRI > 90 constantly
- Easy to operate from the floor with a pole for pan, tilt and zoom
- Seamless colour temperature adjustment from 1,600 K to 6,500 K
- Adjustable green-magenta correction
- Brilliant colours and precise white tone adjustment
- Continuous zoom for beam angles from 18° to 55°
- Four selectable 16-bit dimmer curves with adjustable response
- Highly efficient cooling...
- Full Colour Fresnel with special RGBW LED and CRI > 90 constantly
- Easy to operate from the floor with a pole for pan, tilt and zoom
- Seamless colour temperature adjustment from 1,600 K to 6,500 K
- Adjustable green-magenta correction
- Brilliant colours and precise white tone adjustment
- Continuous zoom for beam angles from 18° to 55°
- Four selectable 16-bit dimmer curves with adjustable response
- Highly efficient cooling thanks to a heatpipe and temperature-controlled fan
- Control via DMX and RDM
- Selectable pulse width modulation frequencies up to 25 kHz
- Flicker-free and noiseless operation, ideal for TV, film, photography studios and theatre
- Includes 8-way barn door and gel filter frames
Price on request
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus white LEDs
Additional white LEDs create more contrast and clearer colour boundaries. What is more, they improve the creation of white and pastel colours.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
This product is ETL certified.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
Description
A complete palette of dynamic colours and countless shades of white at maximum reproduction quality - the Cameo F2 FC PO is your perfect Fresnel spotlight for professional application in front of the camera and in theatres. Its pole operability now also makes the Cameo F2 FC PO a great choice for anyone who prefers precise manual adjustment from the ground and is unable or unwilling to use a ladder. Its white tones can be precision-adjusted in CCT mode from 1,600 K to 6,500 K at a constant CRI of over 90, and perfectly adjusted to skin tones, camera sensors and ambient light via additional green-magenta correction. RGBW colour-blending in HSI mode facilitates rapid adjustment of colour, intensity and saturation at the light desk using only three control circuits. Using additional colour filters is a thing of the past. The high-quality 200 mm lens creates a soft-edged beam of light that can be manually and gradually adjusted to all intermediate positions from spot to flood in the 18° to 55° beam angle. At the same time, the integrated condenser lens provides evenly blended colours and colour shadow-free light dispersion, even when using the barn door.
The F2 FC PO is fully RDM-capable and features a range of DMX control modes as well as four 16-bit dimmer curves with adjustable response. Even at its lowest setting, gradual dimming meets the highest theatre demands. Six selectable pulse width modulation frequencies of 800 Hz to 25 kHz ensure flicker-free operation, even for high-speed camera settings. A heatpipe combined with a temperature-controlled fan provides highly efficient cooling and virtually noiseless operation. For convenient configuration, the spotlight's robust die-cast aluminium housing is equipped with three rotary encoders and an OLED display. The Quicklight feature provides lighting technicians with immediate control of the spotlight, without the need to navigate through the menu. 5-pin DMX connections and Power Twist mains sockets facilitate unproblematic daisy chaining. The spotlight comes with an 8-way barn door, a filter frame and a mains cable.