Cameo
STUDIO PAR 4 G2

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Quad colour RGBA/RGBW LEDs

Quad colour LEDs, also referred to as 4-in-1 LEDs, offer RGB colours but also an additional amber-coloured emitter for richer colours and an additional white emitter for improved contrast and greater definition.

Music control

In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The device features wireless master/slave operation.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

DMX EZChase® is the internal delay function of the DMX control command. This enables a chase to be created with a very small number of DMX channels or even without a DMX controller entirely.