Palmer
RIVER inn
Active 2-channel DI box
Versions:
- 2-channel balancing and impedance matching for guitar/bass/keyboard/synthesisers
- Eliminates ground loop hum thanks to galvanic transformer isolation
- Neutral sound thanks to active input stages with high impedance
- Low noise floor
- Individual outputs per channel plus mono sum output containing the signal of both channels
- THRU connection for passing the input signal to the amplifier
- Handles even...
- 2-channel balancing and impedance matching for guitar/bass/keyboard/synthesisers
- Eliminates ground loop hum thanks to galvanic transformer isolation
- Neutral sound thanks to active input stages with high impedance
- Low noise floor
- Individual outputs per channel plus mono sum output containing the signal of both channels
- THRU connection for passing the input signal to the amplifier
- Handles even high-level inputs without distortion
- Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
- Power supply via 9V battery or 48V phantom power unit
- Road-ready aluminium and steel casing
- Incl. rewritable tour label for attachment on to the back of the inn
- Engineered in Germany
RIVER inn
Active 2-channel DI box
RRP 352.00 $ / piece
Specifications
General
Type
Active
Included Accessories
Rubber feet, Tour label
Isolated transformer
Yes
Transformer Ratio
1:3
Ground Lift
Yes
On/Off switch
No
Number of inputs
2
Number of outputs
2
Number of channels
2
Inputs
Input signal type
Unbalanced
Input connector types
6.3 mm Jack TS
Number of instrument inputs
2
Max. input level (< 1% THD, rel. 20 Hz)
-11 dBu
Max. input level (< 1% THD, rel. 1 kHz)
-11 dBu
Input impedance
500 kΩ
Input padding
0 dB, 30 dB
Outputs
Output signal type
Balanced
Output connector types
XLR 3-pole male
Output impedance
110 Ω
Linked outputs per channel
1
Max. output level*
5.5 dBu
Signal processing
Frequency response (±1 dB, rel. 1 kHz)
20 - 20,000 Hz
Min. SNR (+4 dBu, 22 kHz BW, unity, unweighted)
108 dB
Max. THD+N (1 kHz, +4 dBu, unity, unweighted)
0.0013 %
Max. THD+N (30 Hz, +4 dBu, unity, unweighted)
0.0028 %
Max. IMD (SMPTE, 7 kHz, 4:1, +4 dBu)
0.0017 %
Max. IMD (SMPTE, 60 Hz, 4:1, +4 dBu)
0.0017 %
Mains operation
Operation voltage
9 V DC - 24 V DC (external power supply), 48 V phantom power
Rated power
0.5 W
Battery operation
Built in battery tester
No
Housing
Chassis material
Aluminum continuous casting
Environmental
Ambient temperature
-20 - 70 °C
Maximum air humidity (non-condensing)
80 %
Dimensions & weight
Width
50 mm
Height
140 mm
Depth
128 mm
Weight
0.72 kg