Cameo
OTOS® H5

Cold white

According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

Animation wheel

The rotating animation wheel provides three-dimensional effects and is especially effective when used in combination with gobos.

Circular prism

A circular prism multiplies the beam or the gobo projection, placing the result inside a circle.

CMY

This spotlight uses a white light source and subtractive CMY colour blending (cyan, magenta, yellow) for an extremely large palette of colours.

Colour wheel

Turning the colour wheel, which is fitted with various filters, enables very fast changes of colour.

Discharge lamp

Discharge lamps are highly efficient and very bright. They provide a constant light output, good colour reproduction and a long service life.

Focus

The focus function serves to focus the light beam and the gobo projection at any distance.

(Gobo wheel)

Gobo wheels are fitted with static or rotating gobos made of metal or glass. Gobos are essentially templates that allow the projection of patterns, shapes and graphics.

Linear prism

A linear prism multiplies the beam or the gobo projection, placing the result inside a row.

Protection class IP65

The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.

The PAN & TILT feature moves light emission along the X and Y axes.

Linear CTO

This spotlight has a continuously variable CTO correction function (colour temperature orange) which enables settings from cold white to tungsten and warm white.