Cameo
PIXBAR 450 CPRO
Professional 4 x 30 W COB LED bar
- 4 ultra bright 30W COB LEDs
- LED single pixel control for stunning chase and pixel mapping effects
- Absolutely silent operation due to efficient convection cooling
- Flicker free
- Professional connectivity with 3 and 5-pin DMX and Neutrik powerCON I/O
- RDM enabled
- 5-mode DMX control plus standalone operation with master and slave modes
- 4 selectable dimming curves
- Colour temperature correction
- 3...
- 4 ultra bright 30W COB LEDs
- LED single pixel control for stunning chase and pixel mapping effects
- Absolutely silent operation due to efficient convection cooling
- Flicker free
- Professional connectivity with 3 and 5-pin DMX and Neutrik powerCON I/O
- RDM enabled
- 5-mode DMX control plus standalone operation with master and slave modes
- 4 selectable dimming curves
- Colour temperature correction
- 3 temperatures of white: warm white, white, cool white
- Rugged die-cast aluminium housing
RRP 378.97 $ / piece
Specifications
COB LED technology
The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Three-colour RGB-LEDs
In RGB LEDs, also known as 3-in-1 LEDs, each LED has its own red, green and blue emitter. This means that each individual LED can display the additive RGP spectrum as well as white.
Single pixel control
This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Description
The Cameo PixBar 450C PRO is a 53° beam width professional LED bar with 8 ultra bright 30 watt COB-LEDs for solid colour mixing with seamless transition. Highly efficient convection cooling and a 3,000 Hz refresh rate ensure absolutely noiseless operation and flicker free performance.
The PixBar 450C PRO is fully RDM compatible for bi-directional communication with a dedicated controller providing addressing, configuration and status reporting of the fixture. It is capable of standard DMX control in 5 modes and standalone, master or slave operation. The PixBar 450C PRO also features autorun software, a built-in microphone for music control and a backlit display with Mode, Enter, Up and Down keys for manual control.
In addition to rich RGB colours and macros calibrated to the LEE filters standard the PixBar 450C PRO provides colour temperature correction, 4 selectable dimming curves and single pixel control for impressive chase effects.
The fixture's rugged aluminium enclosure features 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and an adjustable stand that doubles as mounting bracket.