Service Hotline:
+49 6081 9419-300

Help & Service

Shopping Basket

0

Palmer
RIVER inn

Active 2-channel DI box

NEW
RIVER inn

RRP 268.00 $ / piece

Item No.:
PINN
EAN:
4049521908040
Guarantee:
60 Months
Unit:
piece
Series:
River
Questions about the product?
  • 2-channel balancing and impedance matching for guitar/bass/keyboard/synthesisers
  • Eliminates ground loop hum thanks to galvanic transformer isolation 
  • Neutral sound thanks to active input stages with high impedance
  • Low noise floor 
  • Individual outputs per channel plus mono sum output containing the signal of both channels
  • THRU connection for passing the input signal to the amplifier 
  • Handles even...
Read on
RIVER inn
RIVER inn
Active 2-channel DI box

RRP 268.00 $ / piece

Specifications

Specifications

General
Type
Active
Included Accessories
Rubber feet, Tour label
Isolated transformer
Yes
Transformer Ratio
1:3
Ground Lift
Yes
On/Off switch
No
Frequency response (±1 dB, rel. 1 kHz)
20 - 20,000 Hz
Number of inputs
2
Number of outputs
2
Number of channels
2
Inputs
Input signal type
Unbalanced
Input connector types
6.3 mm Jack TS
Number of instrument inputs
2
Max. input level (< 1% THD, rel. 20 Hz)
-11 dBu
Max. input level (< 1% THD, rel. 1 kHz)
-11 dBu
Input impedance
500 kΩ
Input padding
0 dB, 30 dB
Outputs
Output signal type
Balanced
Output connector types
XLR 3-pole male
Output impedance
110 Ω
Linked outputs per channel
1
Max. output level*
5.5 dBu
Signal processing
SNR (+4 dBu, 22 kHz BW, unity, unweighted)
108 dB
Max. THD+N (1 kHz, +4 dBu, unity, unweighted)
0.0013 %
Max. THD+N (30 Hz, +4 dBu, unity, unweighted)
0.0028 %
Max. IMD (SMPTE, 7 kHz, 4:1, +4 dBu)
0.0017 %
Max. IMD (SMPTE, 60 Hz, 4:1, +4 dBu)
0.0017 %
Mains operation
Operation voltage
48 V phantom power, 9 V DC - 24 V DC (external power supply)
Rated power
0.5 W
Battery operation
Built in battery tester
No
Housing
Chassis material
Aluminum continuous casting
Environmental
Ambient temperature
-20 - 70 °C
Maximum air humidity (non-condensing)
80 %
Dimensions & weight
Width
50 mm
Height
140 mm
Depth
128 mm
Weight
0.72 kg

Description

If you're looking to pick up a pure guitar, bass, or electric piano signal with all its brilliance and without any tonal shift - even stereo sources, or two instruments simultaneously - the Palmer inn active DI box provides the ideal solution. Its low-noise active circuitry allows a higher input impedance than a passive DI box. This means the sound of the instruments is captured without treble or bass losses. High-level input impedance is especially important in interaction with the magnetic pickups in electrical guitar, electric bass and electromechanical electric pianos (e.g. Rhodes), as well as with (passive) piezo pickups for acoustic instruments. The Palmer inn is also very well suited to synthesisers and other electronic keyboards as it also offers sufficient headroom to handle high-level sources without unwanted distortion. In addition, the inn is two-channel, meaning it can process stereo signals or two instruments simultaneously.

Naturally, the Palmer inn has a THRU output to transmit the input signal to the instrument amplifier. With 30 dB pre-attenuation activated, the Palmer inn is also optionally looped in between the amplifier output and loudspeaker unit if the sound shaping from the amplifier is to be recorded too, instead of the “raw” instrument signal. An especially practical feature is that - in addition to the individual outputs for both channels - it also offers a sum output with the signal of both channels. This saves on mixer channels.

The balanced, low-impedance output signals from the Palmer inn are resistant to interference, which enables long cable runs without loss of sound quality. Thanks to the integrated transformer, the XLR outputs are galvanically isolated and have individual Ground Lift switches to eliminate ground loop hum without fuss. For a power supply, 48V phantom power or a standard PSU (9-24V) can be used.

You’ve probably spent a long time searching for YOUR sound and invested a lot of time and money to get your instrument to sound the way it should. The Palmer inn transmits that sound faithfully and free of interference - across two channels! This means your sound reaches the listener exactly as nature intended.

Downloads/links

User manual

Category: Manual

Type: pdf

File size: 4 MB

Information sheet

Category: Data Sheet

Type: pdf

File size: 726 KB

Palmer Catalogue

Category: Catalog

Type: pdf

File size: 31 MB

Item images

Category: Product images

Type: zip

File size: -

 Name
Category
Type
File size
User manual Manual pdf 4 MB
Information sheet Data Sheet pdf 726 KB
Palmer Catalogue Catalog pdf 31 MB
Item images Product images zip -
(0) Download files