Cameo
FLAT PRO SPOTIX 4
4 x 30 W COB LED TRI Colour Spot PAR Light in Black Housing
- Ultra bright 30 W RGB LEDs
- COB LED technology for seamless colour blends
- Flicker free
- LED single pixel control for pixel-mapping effects
- Absolutely silent operation due to efficient convection cooling
- Professional connection options with Neutrik PowerCon inputs/outputs as well as 3-pin and 5-pin DMX input and output sockets
- Rugged, flat and compact metal housing
- RDM enabled
- 4 selectable dimming...
- Ultra bright 30 W RGB LEDs
- COB LED technology for seamless colour blends
- Flicker free
- LED single pixel control for pixel-mapping effects
- Absolutely silent operation due to efficient convection cooling
- Professional connection options with Neutrik PowerCon inputs/outputs as well as 3-pin and 5-pin DMX input and output sockets
- Rugged, flat and compact metal housing
- RDM enabled
- 4 selectable dimming curves
- Color temperature correction
- 3 temperatures of white: warm white, white, cool white
RRP 510,57 AUD / piece
Specifications
COB LED technology
The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Three-colour RGB-LEDs
In RGB LEDs, also known as 3-in-1 LEDs, each LED has its own red, green and blue emitter. This means that each individual LED can display the additive RGP spectrum as well as white.
Single pixel control
This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Description
The Cameo Flat Pro Spotix 4 is a compact, flat PAR light with RGB colour mixing for demanding professional use. Four long-lasting, 30 watt strong COB LEDs generate seamless colour blends with a beam angle of 30° and 3800 lux illuminance. The Single Pixel Control provides pixel-mapping effects for brilliant, eye-catching lighting.
The Cameo Spotix 4 can be controlled in the DMX modes with 2-channel, 3-channel 1, 3-channel 2, 9-channel and 18-channel. The built-in microphone allows an external sound control. The projector is equipped with numerous programs and diverse functions and can be used as master, slave and standalone. A backlit display and the Enter, Value Up, Value Down and Mode buttons are used for simple, intuitive operation.
The Cameo Flat Pro Spotix 4 operates with highly efficient convection cooling and is thus absolutely noiseless; it works on all mains voltages from 100 to 240 volts. The robust, black metal housing is equipped with 3-pin and 5-pin XLR sockets for the input and output of the DMX signal; powerCON connectors from leading manufacturer Neutrik are used for the power supply and output. An adjustable multi-purpose mounting bracket offers a variety of alignment and installation options.