DENEB 5Q AES3

WIDEO

DENEB 5Q AES3

DENEB 5Q 4 Channel Amplifier + AES3

Nr artykułu: RAMDENEB5QAES3

Gwarancja: 60 miesiące

EAN: 4049521806933

Zakup w partiach: 1

Jednostka: Sztuka

Jednostka opakowaniowa: 1

Seria:DENEB

Wersje:

Pytania dotyczące artykułu?

Znajdź sprzedawcę

Najważniejsze informacje o artykule:

Large IPS display, capacitive touch panel user interface
High performance 96kHz DSP processor
Optional Dante™ Networking (AES67) and AES3 Digital inputs
Two ports Ethernet and USB port for DSP control
Optional GPIO for third party interface
Low weight high efficiency class D topology
Universal power supply with PFC
Up to 10000 W in 4 channels
8, 4 and 2 Ohm low impedance operation
100, 70, 50 and 35 V high impedance modes
Advanced RAM Audio Power Control Management (PCM™)
Phoenix connectors for inputs and outputs
Up-side-down design to avoid fan dust accumulation
Removable dust filter foam
Temperature controlled, front to back cooling fan

Specyfikacje

Channels

4

Total output power

5000 W

Rated ouput power @ 2 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 2 Ohms (single channel)

1 x 1250 W

Rated ouput power @ 2.67 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 2.67 Ohms (single channel)

1 x 1700 W

Rated ouput power @ 4 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 4 Ohms (single channel)

1 x 2500 W

Rated ouput power @ 8 Ohms (all channels driven)

4 x 1250 W

Rated ouput power @ 8 Ohms (single channel)

1 x 1250 W

Rated ouput power (4 Ohms, bridged)

2 x 2500 W

Rated ouput power (8 Ohms, bridged)

2 x 2500 W

Hi - Z 100 V

4 x 1250 W, 1 x 2500 W

Hi - Z 70 V

4 x 1250 W, 1 x 1800 W

Max output voltage

150 Vpeak

Max. output current

36 Apeak

Total Harmonic Distortion (THD)

< 0.05 %

Crosstalk (20Hz - 1kHz)

> 70 dB

Voltage gain

26 dB to 44 dB

Signal/noise ratio

111 dB

Operating voltage

90 V AC - 265 V AC, 50 - 60 Hz

1/8 rated power (@230V/4 ohm)

3.7 A

Protection circuits

on/off transients, power supply overload, soft start, RF, PCM ™, mute when turning on, Open or mismatched loads, Short circuit, thermal overload, DC, ICL™

Width

483 mm

Height

89 mm

Depth

330 mm

Weight

7 kg

Opis

DENEB 5Q AES3

DENEB Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure through the DSP how to sharing the power between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have been equipped with a high quality 64 bit double-precision 96kHz FIR-DSP and a large IPS display, capacitive touch panel user interface.

Optional Dante™ Networking (AES67) and AES3 Digital inputs are available for DENEB amplifiers.

These devices also can be equipped with a GPIO connection to interface with a third party control system.

With all these configurations DENEB amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Wideo na temat tego produktu

Do pobrania

	Nazwa	Typ	Format	Wielkość pliku
	RAMDENEB5QAES3 Quick Start Guide	Quick Start Guide	.pdf	450.32 KB
	RAMDENEB5QAES3 Product Data Sheet	Product Data Sheet	.pdf	871.52 KB
	RAMDENEB5QAES3 Software RAM OCS	Software	.zip	14.77 MB
	Ram Audio Catalogue / Brochure RAM Audio	Catalogue / Brochure	.pdf	2.11 MB
	Zdjęcia artykułu	Zdjęcia i grafiki	.zip	-

Niczego nie znaleziono?
Więcej plików do pobrania znajdą Państwo w naszym Centrum pobierania.

Do centrum pobierania

Historie