Cameo
PIXBAR 200 PRO
Professional 12 x 3 W TRI LED Bar
- Ultra bright 12x3W TRI LEDs
- LED single pixel control for stunning chase and pixel mapping effects
- Absolutely silent operation due to efficient convection cooling
- Flicker free
- Professional connectivity with 3 and 5-pin DMX and Neutrik powerCON I/O
- RDM enabled
- 7-mode DMX control plus standalone operation with master and slave modes
- Diffusion lens included for a smooth wash with minimum dazzle
- 4 selectable...
- Ultra bright 12x3W TRI LEDs
- LED single pixel control for stunning chase and pixel mapping effects
- Absolutely silent operation due to efficient convection cooling
- Flicker free
- Professional connectivity with 3 and 5-pin DMX and Neutrik powerCON I/O
- RDM enabled
- 7-mode DMX control plus standalone operation with master and slave modes
- Diffusion lens included for a smooth wash with minimum dazzle
- 4 selectable dimming curves
- Colour temperature correction
- 3 preset temperatures of white: warm white, white, cool white
- Rugged die-cast aluminium housing
RRP 416,96 NZD / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Three-colour RGB-LEDs
In RGB LEDs, also known as 3-in-1 LEDs, each LED has its own red, green and blue emitter. This means that each individual LED can display the additive RGP spectrum as well as white.
Single pixel control
This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Description
The Cameo PixBar 200 PRO is a professional LED bar with 12 ultra bright 3 watt TRI-LEDs and RDM compatibility enabling bi-directional communication. It provides vibrant RGB colour mixes, 4 selectable dimming curves, macros calibrated to the LEE filters standard and single pixel control for stunning chase effects.
Attached to a dedicated controller the RDM protocol enhancement allows convenient addressing, configuration and status monitoring of the PixBar 200 PRO. The fixture is also capable of standard DMX control in 7 modes and standalone, master or slave operation. It features autorun software, a built-in microphone for music control and a backlit display with Mode, Enter, Up and Down keys for manual control.
With highly efficient convection cooling the PixBar 200 PRO is absolutely noiseless, and the 3,000 Hz refresh rate ensures flicker free performance. Additional features of the fixture are colour temperature correction and 3 temperatures of white (warm white, white, cool white).
The PixBar 200 PRO comes in a rugged aluminium enclosure with 3 and 5-pin DMX inputs and outputs, Neutrik powerCON mains connectors and a solid stand that doubles as mounting bracket.