Cameo
STUDIO PAR TW G2
LED PAR Spotlight with 12 x 3-in-1 Tunable White LED
- 12 x 10 W 3-in-1 Tunable White LED with 4,150 lm luminous flux
- Variable white light (2,800 - 6,800 K) + amber
- High colour fidelity: CRI>95
- Revised design with many workflow optimisations
- Selectable pulse width modulation (up to 25 kHz) for flicker-free operation
- Virtually silent operation in "Silent Fan Mode"
- Intuitive holding mechanism for colour filter frames
- Wireless control via W-DMX™ via optional Cameo iDMX...
- 12 x 10 W 3-in-1 Tunable White LED with 4,150 lm luminous flux
- Variable white light (2,800 - 6,800 K) + amber
- High colour fidelity: CRI>95
- Revised design with many workflow optimisations
- Selectable pulse width modulation (up to 25 kHz) for flicker-free operation
- Virtually silent operation in "Silent Fan Mode"
- Intuitive holding mechanism for colour filter frames
- Wireless control via W-DMX™ via optional Cameo iDMX Stick
- Simple configuration via OLED display
- PowerCON compatible power connector
- Fold-out 16 mm TV spigot (SPIN16®) can be retrofitted as an option
RRP 540.02 $ / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
The device features wireless master/slave operation.
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
DMX EZChase® is the internal delay function of the DMX control command. This enables a chase to be created with a very small number of DMX channels or even without a DMX controller entirely.
Description
They can be found at almost every event - large or small, on live stages or corporate events, in the theatre or TV studio. LED PAR spotlights are permanent fixtures in the portfolio of every lighting designer and rental provider - and they have to meet the highest demands in terms of lighting quality, operation and flexible use.
With the second generation of the STUDIO PAR series, Cameo has revised the genre of classic LED PAR fixtures for static lighting on all levels and given the design an unmistakable facelift.
The extremely compact STUDIO PAR TW G2 is based on 12 x 10 W 3-in-1 Tunable White LEDs with an impressive luminous flux of 4,150 lm at an 18° beam angle and uniform light distribution. Thanks to its infinitely variable white light adjustment in the range from 2,800 to 6,800 K, variable PWM frequency (650 Hz to 25 kHz) and natural colour rendering (CRI>96), the STUDIO PAR TW G2 is also suitable for use in theatres, TV studios, on film sets or at indoor light art festivals. Even more versatile is its use in combination with the optionally available Cameo iDMX Stick to control the STUDIO PAR TW G2 wirelessly via W-DMX™.
For particularly flexible mounting, the STUDIO PAR TW G2 can be optionally retrofitted with a fold-out 16 mm TV spigot based on patented SPIN16® technology.