Cameo
OTOS® W12
Testa mobile Wash IP65
- 32 x 50W RGBL-LED con 19.500 lm di flusso luminoso
- Controllo del singolo pixel
- Anello per effetti FX LED controllabile
- Obiettivo e zoom 4° - 60°
- Il multizoom consente tre livelli di zoom controllabili individualmente
- Modalità a doppio ingresso come opzione per la mappatura dei pixel
- Opzioni di controllo flessibili tramite ricetrasmettitore W-DMX™ e CRMX integrato, DMX e RDM
Prezzo disponibile su richiesta
Specifiche
DMX512
Lo standard di comunicazione DMX512 è stato sviluppato appositamente per i sistemi di illuminazione nel 1986. È possibile collegare in serie fino a 32 dispositivi DMX e controllarli da una sorgente di controllo (ad esempio un mixer luci).
Ecocompatibile
L'elevata efficienza energetica, la lunga durata delle lampadine a LED e la bassa emissione di calore rendono questo dispositivo particolarmente rispettoso dell'ambiente.
Grado di protezione IP65
Il codice IP della classe di protezione indica che le parti sensibili di un dispositivo sono ben protette contro l'ingresso di corpi estranei e acqua. Questo dispositivo è completamente protetto contro l'ingresso di polvere e getti d'acqua.
Tecnologia a LED
I LED sono eccezionali per i sistemi di illuminazione: sono luminosi e vantano una potenza termica molto bassa, una lunga durata e un consumo energetico ridotto. Inoltre, il peso dei sistemi LED è spesso inferiore a quello dei tradizionali sistemi di illuminazione.
Master e slave
La modalità master/slave consente il controllo di terminali DMX identici tramite un terminale DMX dello stesso modello e con la medesima versione software. Tutti i dispositivi sono collegati in serie con mediante cavi DMX. Inoltre, viene attivata la modalità stand-alone nel dispositivo master e la modalità slave nei dispositivi slave.
Modalità stand-alone
In modalità stand-alone, le funzioni del dispositivo vengono controllate da programmi integrati, in modo che non sia necessario un mixer o un controller "master".
Stroboscopio
Gli stroboscopi emettono rapide sequenze di flash, "congelando" apparentemente i movimenti e creando una sorta di effetto al rallentatore.
Controllo individuale pixel
Questo dispositivo dispone di un controllo individuale pixel. Grazie alla capacità di controllare individualmente il colore e la luminosità di ciascun pixel LED ('Single Pixel Control'), questo dispositivo può essere utilizzato per creare motivi grafici animati ed effetti di mappatura dei pixel.
RDM
Questo dispositivo è completamente abilitato per RDM. Il protocollo RDM integra il protocollo DMX e consente la comunicazione bidirezionale su una rete DMX standard. Semplifica la configurazione, la gestione e il monitoraggio dei dispositivi RDM collegati a un controller RDM.
La funzione PAN & TILT assicurano il movimento del raggio luminoso sugli assi X e Y
La funzione W-DMX™ consente la trasmissione wireless dei dati di controllo DMX
Possibilità di diverse angolazioni di emissione
L'appareil dispose d'une fonction maître/esclave sans fil
Questo prodotto possiede una certificazione ETL INTERTEK.
Il comando ad alta frequenza dei LED durante il dimming assicura un funzionamento senza sfarfallio anche nella telecamera.
Il chip di calibrazione assicura che i mix di colori della lampada siano riprodotti in modo identico quando si utilizzano più dispositivi. Le differenze di colore tra le lampade sono quindi escluse.
RGBL
Questo prodotto contiene una miscela di colori RGBL composta da rosso, verde, blu e lime.
Descrizione
With vibrant accents, the wash products in the OTOS® series enrich outdoor concert and festival stages as well as major TV show productions. Three multi-faceted eye-catchers, rich in features that are an absolute must.
Versatile zoom levels
As the largest IP65 wash moving head in its series, the OTOS® W12 fascinates with its multi-zoom feature. It enables three different levels to be controlled individually and the zoom range to be adjusted on several levels. This feature can be used on two zoom levels with the OTOS® W6 and on one level with the OTOS® W3.
FX LED effect ring
All models have the controllable FX LED effect ring in common, which can shine both in white tones and in a wide range of colours. The effect ring is barely visible when the device is switched off as it has a narrow width and therefore fits discreetly into the stage design.
Single Pixel Control & Dual Input Mode
Depending on the size of the product, either 7 x 50W, 16 x 50W or 32 x 50W RGBL LEDs are available, which can be controlled individually using Single Pixel Control. - The FX effect LED ring also has a large number of pixels, which can also be controlled individually. For more efficient use of the DMX channels, you can also use the dual input mode, which allows you to assign a separate colour to each pixel via pixel mapping.
Flexible control options
All IP65 wash moving heads in the OTOS® series have an integrated W-DMX™ & CRMX transceiver, but can also be controlled by cable via DMX and RDM.
Three options that will spice up your shows. Decide now and "Ride vibrant".