Cameo
PIXBAR® 600 PRO
Professional 12 x 12 W RGBWA + UV LED Bar
- 12 ultra-bright 12 W RGBWA+UV LEDs
- Single Pixel Control for effective Chase effects
- Silent operation thanks to convection cooling
- Flicker-free
- Professional 3- and 5-pin DMX sockets and Neutrik powerCon mains connector
- Fully RDM-enabled
- 7 DMX modes plus operation as a standalone, master or slave
- Diffusing lens for uniform, glare-free light
- 4 adjustable dimmer curves
- Colour temperature...
- 12 ultra-bright 12 W RGBWA+UV LEDs
- Single Pixel Control for effective Chase effects
- Silent operation thanks to convection cooling
- Flicker-free
- Professional 3- and 5-pin DMX sockets and Neutrik powerCon mains connector
- Fully RDM-enabled
- 7 DMX modes plus operation as a standalone, master or slave
- Diffusing lens for uniform, glare-free light
- 4 adjustable dimmer curves
- Colour temperature correction
- 3 preset shades of white: warm white, cool white, white
- Sturdy aluminium housing
RRP 543.81 $ / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
6-in-1 LED
Additional amber-coloured, white and UV LEDs expand the GB spectrum, creating more saturation and contrast as well as clearer colour boundaries. The UV-LED is a practical extra and an alternative to conventional black light.
RGBWA
Additional white and amber-coloured LEDs expand the GB spectrum, creating more contrast as well as clearer colour boundaries. What is more, they improve the creation of white and pastel colours. The amber-coloured LEDs create more powerful and warmer colours with greater saturation.
UV
UV and black light lamps are used to create decorative or artistic effects.
Single pixel control
This device has an individual pixel control function. Since the colour and brightness of each LED pixel can be individually controlled (“Single Pixel Control”), the device can be used to generate animated graphic patterns and pixel mapping effects.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
Description
The Cameo PIXBAR® 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,000 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PIXBAR® offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PIXBAR® 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PIXBAR® 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.